Current Reviews: 7

Ignitech TCI-P4 (V96) Ducati programmable ignition

  • Model: TCIP4
  • Shipping Weight: 1lbs
  • 2 Units in Stock
  • Manufactured by: Ignitech

NZ $499.00

Add to Cart:

Please note this price includes a copy of the FastBikeGear Ignitech Manual and the Ducati plug-in wiring loom or universal interface loom.

This Ignitech TCIP4  programmable ignition System is a plug compatable plug-in replacement for the  Ducati 900SS (91-97 & 98 F.E.) and Monster M900 (93-98) Kukosan ignition units. The TCIP4 replaces both Kukosan units. Comes supplied with wiring loom and plugs to allow you to connect this unit into your Ducati's standard wiring loom in a few minutes.

A single Ignitech unit replaces both Kukosan ignition modules fitted to your Ducati to provide noticeably cleaner and smoother running on standard engines and also gives you options to make the best of modified engines.

We supply the units pre-programmed to suit non modified Ducati 900SS carburettored bikes. Installation takes just a few minutes. All you need to do is unplug your kukusan modules and plug in the Ignitech unit.

Of course if your engine is modified you can simply remap the ignition curve using you PC or laptop to suit your engine. We can provide you with experienced technical support to assist with this.  Ignitech configuration software is included with the unit. All you need to program this ignition system is a computer running a Microsoft Windows operating system and a serial to USB cable.

Most customers will not use (or need to use) half the range of extensive features available.

We supply the units with both the manufacturers manual and FastBikeGear's manual . The FastBikeGear manual is vastly superior to the original manual, it has improved readability (due to improved translation), more details & explanations, tips and tricks, etc.  It also documents the extra features that have been added by recent firmware upgrades and an excellent appendix on optimising ignition advance for maximising performance.

Short Feature list:

  • Fully mappable ignition curve: Ignition map is fully programmable or you can select from one of the supplied pre configured maps for a range of bikes.
  • 2 x  inputs/connectors that are plug compatible with  your existing ignition pickup sensor connectors.
  • 2 x ignition coil output  connectors that are plug compatible with the three pin out put connectors from your Kukusan ignition modules.
  • 1 x optional use input for TPS (throttle position sensor),
  • 1 x optional use input for ignition blocking input,
  • 1 x optional use input for input for clutch lever switch.
  • 1 x optional use output for use if you have a digital tachometer.
  • 1 x optional use output for fuel pump relay,
  • 1 x optional use output for gear shift light etc.
  • Settable Rev limiter
  • Optional use outputs for servos.
  • Includes Microsoft windows compatible configuration software.

If you have any pre purchase queiries please feel free to email us.


Copyright © 2024 FastBikeGear. Powered by Zen Cart