Please note these mirrors are sold as single items and the price shown is for one mirror.
75mm Streetfighter Bar End Mirror by Oberon Performance to fit motorcycles with handlebars that have M8 internal Threads and a protruding or flush handlebar when the original bar end is removed. CNC machined from T6 billet aluminium and designed to provide the sleekest look. The angled arm can be mounted in either side or end hole, which allows top, bottom and side configurations. It's up to you where the side hole faces. There is almost no end to the positions that can be achieved and what's more, the ingenious design allows the mirror to be right or left mounted on the end of the handlebars.
The mirror lens is first surface chromed glass and automotive standard convex (Mirror glass has a spherical radius of 1260mm) giving superb visibility and weather resistance. Stainless steel grub screws 'lock' the mirror in place ensuring the field of vision is not altered or accidentally disturbed. The finish is a high quality anodise that leaves a silky sheen that will retain its looks years after life on the road.
The Streetfighter bar end mirror is more than just a mirror, it is a bar end weight solution too. The combined weight of the bar end mirror replaces the original bar end weight giving total peace of mind. Due to the unique Oberon Performance design the mirror will feel 'welded' to the handlebar.
Simply remove your existing bar end weight, check the thread size in the handlebars and confirm it matches the image below. Full installation instructions are included with every purchase and technical support and advice can be sought directly from Oberon Performance. We would advise against fitting mirrors to handlebars which have a rubber mounted inner spigot, the mirror may not be solid enough to resist flexing or vibration with that particular setup.
These are the original and best Streetfighter mirrors. Now available in two sizes of mirror lens (60mm or 75mm) to suit handlebars with an internal 6mm or 8mm threaded hole, the bar end fitting has a bore of 26mm x 7mm deep, supplies with optional packing washers to reduce that depth for your particular fitting.
