Current Reviews: 2

Hall Effect pick up component kit

  • Model: HE-Kit
  • Shipping Weight: 1lbs
  • 2 Units in Stock
  • Manufactured by: FBG

NZ $29.95

Add to Cart:

The kit provides you with the key components you need to retro fit Hall Effect pickups to older bikes using the FBG Hall Effect version of the Ignitech programmable ignition system. 


  • two Hall Effect pickups
  • two magnetic rod triggers to be installed in the trigger rotor.
  • diagrams and instructions

The kit does not include the rotor or the hall effect mounting plate or the trigger rotor. You will need to fabricate these for yourself or purchase one of our mounting kits.

We can also supply you with a complete complementary ignition kit including an Ignitech programmable ignition system. Nology Ignitech-matched ignition coils and our UltraRace spark 8mm Silicon spark plug leads.

Why upgrade to a Hall Effect ignition trigger system?
There are two key reasons.

Reason one is to get rid of the wasted spark and give the primary current up to twice as long to build to a maximum in the primary windings of the ignition coils. To get rid of a wasted spark you usually need to move from a crank mounted pickup system to a cam mounted pick up system.

Unfortunately Inductive pickups output voltage is very dependent on the speed the ferrous lobe passes the inductive pick up.

Cams rotate at half the speed and the cam driven trigger rotors are less than half the diameter of the flywheel. Both of these factors conspire to ensure that the speed that the ferrous lobe passes the pickup up is relatively slow to crank mounted systems. Which means you sometimes get a weak and erratic ignition system if you try to operate inductive pickup on a cam driven system.

Reason two is the true timing of the ignition pulses changes with changes in speed due to the hysteresis inherent in inductive pickups. This means that the degrees of advance you set in your system does not correspond with what you actually get at all revs.

NONE of the above are issues with hall effect pickups. Hall Effect pickups can give you a very precise (accurate) and clean signal from less than 1 rpm to more than 20,000 rpm.

Most (all?) modern European cars and modern bikes hence use hall effect cam driven pickups.

For overseas orders please email us your delivery address and we will send you a PayPal invoice including postage costs for this item.


Copyright © 2020 FastBikeGear. Powered by Zen Cart