Log In
Contact us

Select country:

Log in for fastest check out.

Evan ****: "Hi Liam. No issues whatsoever with starting. Fired up instantly every time.
Good competition in the mixed class this year. Tawny and her race partn... more

Home > Clutch slave cylinders > Kawasaki

You Have Hidden Items

Left Boxes

Click On Hidden Item To Restore

Center Boxes

Right Boxes

Search

Categories

Bar end race pucks
Bar end weights
Batteries
Battery chargers
Braided brake lines
Brembo Brake Carriers
Bucket racing stuff
Chain oilers
Clip-ons
Clutch slave cylinders
   - Aprilia
   - BMW
   - Buell
   - Ducati
   - Harley Davidson
   - Honda
   - Husqvarna
   - Kawasaki
   - KTM
   - Moto Morini
   - MV Agusta
   - Norton
Crash protection
Cruise throttle control
Downpipe guards
Ducati specialist stuff
Electrical Accessories
Exhaust stuff
Fender Extenders
Foot peg kits
Heated grips
Huggers
Ignition systems & components
Lever guards
Levers
Lights & indicators
Mirror blanking plugs
Mirrors
Paddock stand cotton reels
Phone mounting kits
Posi-Lock connectors
Quick shift kits
Radiator & Oil Cooler Guards
Rearsets & Foot Peg Kits
Rego & WOF holders
Regulators - Rectifiers
Reservoir caps
RexXer ECU performance mapping
Security
Sundry stuff
Suspension stuff
Tail tidies
Tank Pads
Tank race grip
Specials ...
New Products ...

Suppliers

Select your bike Model Year:

Kawasaki

Displaying 1 to 4 (of 4 products)

Item	Product Image	Price
Oberon Kawasaki clutch slave cylinder Concours 14 (08-16) Ninja ZX-14 (06-11) Ninja ZX14R (12-16) Oberon EZ pull clutch slave cylinders are a 10 minute bolt on replacement unit that improves the performance, reliability and looks of the original Ducati cylinder. Easy fitment Everything you need...		NZ $225.00 ... more info
Oberon Kawasaki clutch slave cylinder GPZ1100 and ZX1100 (95-97) Oberon EZ pull clutch slave cylinders are a 10 minute bolt on replacement unit that improves the performance, reliability and looks of the original Ducati cylinder. Easy fitment Everything you need...		NZ $225.00 ... more info
Oberon Kawasaki clutch slave cylinder Z1100 GTR1000 (95-06) ZRX1200 ZR1200 (01-05) ZX-11 (90-93) Ninja ZX-11 (93-01) Oberon EZ pull clutch slave cylinders are a 10 minute bolt on replacement unit that improves the performance, reliability and looks of the original Ducati cylinder. Easy fitment Everything you need...		NZ $225.00 ... more info
Oberon Kawasaki clutch slave cylinder ZXR750 (89-95) ZX-7R (96-97) ZX-7RR (96-97) ZX-9R (94-97) Oberon EZ pull clutch slave cylinders are a 10 minute bolt on replacement unit that improves the performance, reliability and looks of the original Ducati cylinder. Easy fitment Everything you need...		NZ $225.00 ... more info

Displaying 1 to 4 (of 4 products)

Currencies

Reviews

FastBikeGear's User Guide for Ignitech TCI-P4

Gary ****: "Hi Liam, thanks for the manual, very kind of you, will also post some feedback on the www.ducati.ms forum,
kind regards,
Gary." ..

Oberon waterproof rego holder (black)

Ben ****: "Fantastic professional online shop with everything in place to make it as easy as ABC. Goodonya FBG." ..

Posi-Lock Red Connector (18-24 gauge)

Henry ****: "Some feedback on the posilock connecters (non water proof connectors), i use them to wire jet boats and they are great never failed and easy to take on and off. They see a lot of water and rough conditions in the engine bay of the boats." ..

Ignitech TCI-P4 programmable ignition (FBG Hall Effect version)

Took less than 5 minutes to fit. Started the bike from cold and noticed straight away that it seemed to be running alot smoother but the engine revs had dropped slightly at idle. After a run on the bike to get it up to operating temp it was noticeable how much better it was running, even when cold. Re adjusted the carbs to run at 1200rpm and let the bike cool before taking it for another run. Again it started perfectly and ticked over nicely without stalling without choke being applied. On the runs that I have done so far It is noticeable how much better it seems to be going over the whole rev range even for a stock bike like mine. Once I had this all sorted I fitted a set of iridium spark plugs and it is going even better again. All I can say is it is worth the money to upgrade to this ignition module, even if you don't intend to use any of the additional features that it has. Highly recommend this product. ..

Information

Interesting Stuff

Home
:: My Account :: Contact us :: Site Map :: Privacy Notice

Copyright © 2017 FastBikeGear. Powered by Zen Cart. Template By ZenCart-jQuery.